Filtered Results

Read the NI-9402 Safety, Environmental, and Regulatory Information and complete the software and hardware installation procedures in your chassis documentation.

You can connect digital devices to the NI-9402 . Figure 1. Connecting Digital Devices to the NI-9402 +3.3 V +5 V DIO0 as Input DIO1 as Input DIO2 as Output NI 9402 LED Switch TTL Signal Parent topic: NI ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9402 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

The NI 9402 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each NI 9402 is marked II 3G and is suitable for use in Zone 2 hazardous

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

DIO 3 GND DIO 2 GND DIO 0 GND DIO 1 GND Table 1. Signal Descriptions Signal Description DIO Digital input/output signal connection GND Ground connection Parent topic: Before You Begin

Ensure that the environment in which you are using the NI 9402 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-78) ...

Caution Observe all instructions and cautions in the user documentation. Using the product in a manner not specified can damage the product and compromise the built-in safety protection. Attention Suivez ...

Showing 1-10 of 29 results
1 of 3 pages