Filtered Results

Complete the following steps to install the NI 9246 backshell. Figure 4. Connector Backshell Installation 1 2 Align the backshell components with the device terminals. Secure the backshell using the captive ...

Complete the following steps to connect cables using ring lug connectors. Use 5.26 mm 2 (10 AWG) cables. Figure 4. Installing Cables 1 2 Align the cables with the device terminals. Secure the cables using ...

The NI 9246 provides connection for three analog input channels. Figure 2. NI 9246 Pinout AI0+ AI1+ AI2+ AI1- AI0- AI2- Note The NI 9246 does not measure DC currents. Caution Connecting a DC current source ...

You can connect three-phase measurement configurations and single-phase measurement configurations to the NI 9246 . You can connect a current source to the NI 9246 for single-phase measurements. For grounded ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Caution Ensure that hazardous voltage wiring is performed only by qualified personnel adhering to local electrical standards. Caution Do not mix hazardous voltage circuits and human-accessible circuits ...

Proper strain relief of 5.26 mm 2 (10 AWG) cable is required to meet the shock and vibration performance specifications stated in the NI 9246 Datasheet on ni.com/manuals . Strain relieve all cabling as ...

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

This document explains how to connect to the NI 9246 . Note Before you begin, read the NI 9246 Safety, Environmental, and Regulatory Information document on ni.com/manuals and complete the software and ...

Ensure that the environment in which you are using the NI 9246 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Operating humidity (IEC 60068-2-30) ...

Showing 1-10 of 48 results
1 of 5 pages