Filtered Results

I am trying to generate an analog output signal with a DAQmx Analog Output.vi, but I get the followingerror: Error - 200561 occurred at Current-Continuous Output.vi Possible Reason(s): Attempted writing ...

I use an NI 9151 R Series expansion chassis with a PXI R Series module. Will using an expansion chassis affect the performance of C Series modules compared to using it with other CompactRIO chassis? Is ...

I am running an analog output application which outputs voltage or current to one or more channels on my device. After I stop the program, the card is still outputting the voltage and I need to make sure ...

I want to deploy an application in VeriStand 2011 or later using a NI-92XX with a CompactRIO. Veristand cannot find the DAQ target, however, and error -307735 occurs. Is there any way to solve this problem? ...

I am trying to reach the much higher voltage output advertised on my analog output deviceas "stacked". How do I configure a stacked voltage? How do I stack current to exceed the per channel maximum limit? ...

I am using an analog output device like the NI 9265, NI 9266, or NI PCI-6704 which can output current between 0.1 and 20.2 mA according to the specifications. Is it possible to send more than 20 mA from ...

I am trying to generate a current output task with a NI 9265 module, but am not outputting anything. How can I fix this?

Often we need to investigate about the real connection of physical devices connected to our modules. This can be made by monitoring some properties such as open current or overcurrent, with respect to ...

I am running the NI 9265 Getting Started.lvproj example and am getting Error 65542 indicating that there is an open current loop like below. What does this mean and how can I fix it? Error 65542 occurred ...

Showing 1-9 of 9 results