Filtered Results

My NI USB device will occasionally lose connection to the computer, and I have to disconnect and then reconnect it before it will work. Why does this happen, and how can I get Windows to re-detect the ...

I am using an analog trigger to start an input acquisition on my NI 60xxE, 62xx or 63xx (formerly E, M, or X Series) device module. I set my trigger level to a certain voltage and notice that there is ...

In the DAQ device specification sheet, there is about a type of ADC(Analog-to-Digital Converters). What types of ADC are used in National Instruments DAQ Devices, such as Multifunction I/O DAQ, DSA or ...

I am encountering error -200077 with a DAQmx VI: Error -200077 Requested value is not a supported value for this property. The property value may be invalid because it conflicts with another property. ...

What is the difference between the sample clock (scan clock) and the convert clock (channel clock) on my multifunction data acquisition board?

My NI USB devices are showing up with RAW in their name in Measurement & Automation Explorer (MAX) on my Windows machine. Additionally, I cannot communicate with them using Test-Panels or reset the device. ...

I am using the Pulse Measurement Counter Input tasks in DAQmx with my DAQ device and I am getting the following error at DAQmx Create Channel VI: Error -200431 occurred at DAQmx Create Channel (CI-Pulse ...

I am using SCB-68A connected to PCIe-6320. What is the Analog Input Voltage Limitations?

Showing 1-10 of 99 results
1 of 10 pages