Filtered Results

The NI PXI Strain/Bridge Input Module measures bridge-based sensors, such as strain gages and load cells, in PXI systems.

I configured a Analog Input multidevice task in order to take advantage of channel expansion, by adding channels from different PXI devices. Since one of the device (PXIe-4339) is used for bridge input, ...

I want to measure torque using PXI-4220 with a full-bridge sensor. However, in the PXI-4220 user manual, it does not say which type of full-bridge equation I have to use for torque. Which type of full-bridge ...

After updating to NI-DAQmx 19.x, I can no longer complete the calibration procedure for my PXIe-4339 module. The calibration fails at the DAQmx Adjust 4339 Calibration.vi during the Adjustment procedure. ...

How do I configure a load cell in NI Measurement & Automation Explorer (NI MAX)?

I am using anNI-DAQmx SC Express devicein my VeriStand system. I want to acquire samples from this device at a much slower rate than the other NI-DAQmx modules in my system, and slower than the Primary ...

I have a voltage signal I want to measure or a powered sensor that requires DC voltage excitation and returns a non-ratiometric voltage signal. How do I configure the PXIe-4339 to take these raw voltage ...

This document explains how to install, configure, and set up the NI PXIe-4339 SC Express universal bridge module and RM-4339 rack-mount terminal block.

The NI PXIe-4339 has 24-bit resolution and supports sample rates from 1 S/s to 25.6 kS/s.

Showing 1-10 of 23 results
1 of 3 pages