Filtered Results

Creates a new session for the hardware, sets initial values of certain properties for the session, and sends initialization commands to reset all hardware modules to a known state necessary for NI-RFSA ...

Transfers acquired waveform data from device memory to computer memory; this process is also known as fetching. The data transferred is acquired to onboard memory previously by the hardware after the acquisition ...

Initializes an EEPROM-specific external alignment step. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5605 (PXIe-5665 only) PXIe-5606 ...

Commits settings to hardware, waits for hardware settling, and starts an acquisition. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5601/5603/5605/5606 ...

Creates a new configuration list step in the configuration list for RF list mode specified by the Active Configuration List property. When you create a configuration list step, a new instance of each property ...

Configures the number of records in a finite acquisition or configures the device to continuously acquire records. You can only configure the device to acquire a finite number of records if you set number ...

Returns an array to indicate which calibration steps contain valid calibration data. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5663E/5665/5667/5668 ...

Initiates an acquisition and fetches a single I/Q data record. Do not use this node if you have configured the device to continuously acquire data samples or to acquire multiple records.

Showing 1-10 of 103 results
1 of 11 pages