Filtered Results

A DAQmx property node preselected to contain Timing class properties. You can select other classes from the node on the diagram.

A DAQmx property node preselected to contain Device class properties. You can select other classes from the node on the diagram.

A DAQmx property node preselected to contain Timing class properties. You can select other classes from the node on the diagram.

Indicates if the device(s) detected an open current loop for any channel in the task. Reading this property clears the open current loop status for all channels in the task. You must read this property ...

The following tables lists the default input terminals for various counter measurements. You can use a different PFI line for any of the input terminals. To change the PFI input for a measurement, use ...

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

C Series devices do not support hardware-timed single-point sample mode or Wait for Next Sample Clock. Analog Input Timing Considerations for C Series Devices You can use multiple analog input devices ...

For C Series devices, you can filter digital I/O lines and digital input signals. Timing and Triggering Filters for Digital I/O Lines You can configure digital filters on the device by choosing three fixed ...

Device ID Device Name 0x0160NI PCI-DIO-96 0x075CNI DAQCard-DIO-24 0x075FNI DAQCard-6715 0x1150NI PCI-DIO-32HS 0x1290NI PCI-6704 0x12B0NI PCI-6534 0x1310NI PCI-6602 0x1320NI PXI-6533 0x1360NI PXI-6602 0x13C0NI ...

Internal channels for the FD-11613 The following internal channels are available. Internal Channel Name Description FD11613-xxxxxxx-Bank1/_cjtemp0 This channel is used for cold-junction compensation. FD11613-xxxxxxx-Bank1/_cjtemp1 ...

Showing 1-10 of 2282 results
1 of 229 pages