Filtered Results

On an X Series device, you can either acquire a signal present on the I/O connector, or you can acquire a signal that is being generated from the internal calibration multiplexer. The channels available ...

The following tables lists the default input terminals for various counter measurements. You can use a different PFI line for any of the input terminals. To change the PFI input for a measurement, use ...

In physical channel names, cDAQ1Mod1 is the default device name for a C Series device plugged into a USB or Standalone NI CompactDAQ chassis, where cDAQ1 is the default chassis device name, and Mod1 refers ...

Adds a Network cDAQ device to the system and, if specified, attempts to reserve it. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Add Network Device.vi ...

Adjusts the external calibration constants for an NI 9227 device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust 9227 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Adjusts the external calibration constants for an NI 9225 device. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust 9225 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Adjusts the external calibration constants for an SCXI-1540 module. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Adjust SCXI 1540 Calibration.vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) that use an RTD to measure temperature. LabVIEW NXG does not support FPGA devices Not supported in VIs that run in a web application DAQmx Create Channel (AI-Temperature-RTD).vi :/lvdaqmx.chm::/DAQmx ...

Creates channel(s) that use a Wheatstone bridge to measure torque. Use this instance with sensors whose specifications provide a table of electrical values and the corresponding physical values. When you ...

Creates channel(s) that use the built-in sensor of a terminal block or device to measure temperature. On SCXI modules, for example, the built-in sensor could be the CJC sensor. LabVIEW NXG does not support ...

Showing 1-10 of 974 results
1 of 98 pages