Filtered Results

Creates a new session to the device and specifies initialization options, such as setting default values or enabling simulation. Not supported Not supported in VIs that run in a web application This node ...

Configures the NI-568x acquisition mode. Some nodes and properties are only available with certain acquisition modes. The USB-5680 supports only continuous acquisition mode. Not supported Not supported ...

Sets the manual average count that the instrument uses in manual averaging mode. The averaging count specifies the number of samples that the instrument takes before the measurement is complete. Not supported ...

Configures the internal trigger level of the power meter. Not supported Not supported in VIs that run in a web application This node supports the following hardware: USB-5681 USB-5683 USB-5684 session ...

Configures the internal trigger source and slope of the trigger. Not supported Not supported in VIs that run in a web application This node supports the following hardware: USB-5681 USB-5683 USB-5684 session ...

Configures the lower and upper range values for a given channel. The supported ranges for the NI RF power meter are located in the specifications document for your device. NI-568x coerces the values passed ...

Configures the scope mode fence inputs and outputs. This node is applicable only if you select Scope Mode as the mode within Configure Acquisition Mode. Not supported Not supported in VIs that run in a ...

Specifies the number of seconds from the start of the acquisition at which to start the gate region of the waveform acquisition. This node is applicable only if you select Scope Mode as the mode within ...

Configures the exclusion period for each time slot. If you enable an exclusion period, a small amount of time at the start and end of each time slot is excluded from the power measurement calculation of ...

Configures the time slot mode inputs and outputs. This node is applicable only if you set the mode to Time Slot Mode in Configure Acquisition Mode. Not supported Not supported in VIs that run in a web ...

Showing 1-10 of 53 results
1 of 6 pages