Home Support Documentation Compatibility

NI-DAQmx and LabVIEW Compatibility

Updated Jul 6, 2022

Overview

This page shows supported versions of the NI-DAQmx hardware driver with LabVIEW or LabVIEW Real-Time Development Systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

Note that this article replaces KnowledgeBase 3PIA89N5: DAQmx and LabVIEW Version Compatibility. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

Contents

NI-DAQmx Compatibility with LabVIEW Service Packs

LabVIEW service packs do not affect compatibility with NI-DAQmx. For example, DAQmx 15.0 is compatible with LabVIEW 2015 and also LabVIEW 2015 SP1. This does not necessarily apply to other NI drivers.

Back to top

NI-DAQmx and LabVIEW Compatibility Table

The table below refers to NI-DAQmx and LabVIEW (Community, Professional and Run-Time) versions. Please refer to this document for compatibility of NI-DAQmx and LabVIEW NXG.

Back to top

Use this table to compare versions of NI-DAQmx to compatible versions of LabVIEW

NI-DAQmx Version LabVIEW/LabVIEW Real-Time Version
2021 2020 2019 2018 2017 2016 2015
21.8              
21.3              
21.0              
20.7              
20.0              
19.6              
19.5              
19.1              
19.0              
18.6              

Compatible

Older NI-DAQmx and LabVIEW Versions

For compatibility between older versions of DAQmx or LabVIEW, see the DAQmx LabVIEW Compatibility Table attachment in the Downloads section of this document.

Back to top

Additional Resources

Back to top

Was this information helpful?

Yes

No