Sound and Vibration 2020 Bug Fixes

Overview

The following items are notable issues fixed between the release of Sound and Vibration 2019 and Sound and Vibration 2020, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of Sound and Vibration 2020.

Bug Number

Legacy ID

Description

Details

271306 602175

Different generation and acquisition rates result in buffer parsing errors

Workaround:

There is currently no known workaround for this issue.

Reported Version:

LabVIEW Sound and Vibration Toolkit 2016

Resolved Version:

LabVIEW Sound and Vibration Toolkit 2020

Added:

Apr 24, 2017

943122

Sound and Vibration Toolkit 2019 Removes Previous Toolkit Versions During Installation

Installing Sound and Vibration Toolkit 2019 removes previous versions of the toolkit.

Workaround:

Install Sound and Vibration Toolkit 2019.0.1 and reinstall previous Sound and Vibration Toolkits.

Reported Version:

LabVIEW Sound and Vibration Toolkit 2019

Resolved Version:

LabVIEW Sound and Vibration Toolkit 2020

Added:

Jan 21, 2020

943602

Sound and Vibration Toolkit 2019 Breaks Compatibility with PharLap Targets

Sound and Vibration functions cannot be deployed to PharLap targets.

Workaround:

Reach out to National Instruments Support and reference this issue for a detailed workaround.

Reported Version:

LabVIEW Sound and Vibration Toolkit 2019

Resolved Version:

LabVIEW Sound and Vibration Toolkit 2020

Added:

Jan 9, 2020

271313

Audio measurements return incorrect values when fundamental is on bin and FFT window = None

Audio measurements return incorrect values if the fundamental frequency of a signal is on bin and the FFT window has been set to "None."

Workaround:

Wire in the expected frequency to audio measurement VI and set "advanced span" input to 0

Reported Version:

LabVIEW Sound and Vibration Toolkit 2016

Resolved Version:

LabVIEW Sound and Vibration Toolkit 2020

Added:

Apr 26, 2019

309914

Max/Min Functionality Added into the Harmonic Distortion and Noise VI

Max/Min functionality added within the Harmonic Distortion and Noise VI to ensure we never return a negative SINAD value.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

LabVIEW Sound and Vibration Toolkit 2019

Resolved Version:

LabVIEW Sound and Vibration Toolkit 2020

Added:

Oct 3, 2019

Additional Patch Information

Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.

These patches currently do not have any special instructions.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).