Archived: NI System Driver Set November 2013

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Contents

The NI System Driver Set November 2013 provides the latest version of NI drivers as of the release on November 15, 2013. NI LabVIEW 2013 is the latest version of the graphical development software supported by this driver set. This driver set adds support for the following hardware:

  • PXIe-8840
  • PXI/e-2532B

For LabVIEW version compatibility please see the system driver set main page.

 

Contents

The following drivers are included in the November 2013 System Driver Set:

  • Data Acquisition
    • NI-DAQmx 9.8.0
    • Traditional NI-DAQ 7.4.4
  • Instrument Control
    • NI-488.2 3.1.2*
    • NI-VISA 5.4
    • NI-Serial 4.0
    • IVI Compliance Package 4.6
    • PXI Platform Services 4.0.1*
    • NI-PXImc 1.0
    • NI System Monitor 1.2
    • NI-VXI 3.8.1
  • Modular Instruments
    • NI-Switch 4.8
    • NI-DMM 3.1
    • NI-Scope 4.1.1*
    • NI-RFSA 2.7.5
    • NI-FGEN 2.9.3
    • NI-DCPower 1.8.6*
    • NI-RFSG 1.9.5
    • NI-HSDIO 2.0
    • NI-5690 1.1
    • NI-5640R 1.7*
    • NI-OSI 2.1*
    • NI-VNA 2.0.1
    • NI-HWS 1.5.1
  • Timing and Synchronization
    • NI-Sync 3.4.1*
    • NI-TimeSync 1.3
    • NI-1588 Configuration 1.3
  • Reconfigurable IO
    •  CompactRIO 13.0*
    •  R Series 13.0
    •  NI-FlexRIO 13.1*
      •  FlexRIO Adapter Module Support 13.1*
  • Motion
    • NI-Motion 8.5.1*
  • Vision
    • NI-IMAQ 4.8*
    • NI-IMAQdx 4.3*
    • NI-IMAQ I/O 2.8*
  • Distributed I/O
    • NI-FieldPoint 6.1
    • NI-WSN 1.4.0
  • Real-Time and Embedded
    • NI-488.2 3.1.2*
    •  NI-Serial 4.0
    • NI-Watchdog 5.3
  • Communication Buses and Protocols
    • NI-XNET 1.8
    •  NI-CAN 2.7.5
    • NI-DNET 1.6.7
    • NI-IndCom for CANopen 1.0.3*
    • NI-IndCom for DeviceNet 2.3
    • NI-IndCom for EtherCat 2.6
  • Configuration and Utilities
    • NI I/O Trace 3.1.1
    • NI Measurement & Automation Explorer 5.5
    • NI System Configuration 5.5
    • NI Network Browser 5.5

*Update from NI System Driver Set August 2013.

 

 

Download

To download the November 2013 driver set run the downloader attached to this document. Note that this download is larger than 4 GB. Please follow the instructions in KnowledgeBase 5JHC2SDX for downloading this file.