Home Support Documentation Compatibility

Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility

Updated Feb 4, 2020

Overview

This page shows supported versions of the Real-Time [c]FieldPoint Controllers with LabVIEW Real-Time development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

Note that this article replaces KnowledgeBase 4KMFG8AM:Recommended LabVIEW Real-Time Versions for Real-Time [c]FieldPoint Controllers. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility

Use this table to compare Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility
LabVIEW Real-Time Version [c]FieldPoint Version
[c]FP-22xx [c]FP-21xx [c]FP-20xx FP-20xx
2015 SP1        
2015        
2014 SP1        
2014        
2013 SP1        
2013        
2012 SP1        
2012        
2011 SP1        
2011        
2010 SP1        
2010        
2009 SP1        
2009        
8.6.1        
8.6        
8.5.1        
8.5        
8.2.1        
8.2        
8.0        
7.1.1        
7.1        


  Compatible


Note:All [c]FieldPoint network interface modules are compatible with LabVIEW 2015**, 2014**, 2013**, LabVIEW 2012**, 2011, 2010, 2009, 8.x, and 7.x.

**Removed support for [c]FP160x in LabVIEW 2012 onwards.

Back to top

Additional Resources

Back to top