From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
You can contact us by phone, email, or the discussion forums. Visit the NI Website to contact us. If you are contacting NI in regards to a specific issue, be sure to reference the ID.
The following items are known issues in NI Measurements Live Support Files.
ID | Known Issue | |||||
---|---|---|---|---|---|---|
716129 Return | The Current-Voltage Analyzer IV curve stops prematurely at the forward bias voltage instead of the user-selected voltage range. Solution: Update your NI ELVIS III to the LabVIEW 2018 ELVIS III Toolkit SP2 or later.
| |||||
723987 Return | An output delay occurs under certain conditions for the Logic Analyzer and Pattern Generator. When the duty cycle of an output signal is set to 100%, an output delay of up to 6 seconds. Solution: Update your NI ELVIS III to the LabVIEW 2019 ELVIS III Toolkit.
| |||||
735616 Return | Channel 1 and Channel 2 of the Function and Arbitrary Waveform Generator (FGEN) become unsynchronized after changing waveform parameters while running the FGEN soft front panel. Workaround: N/A.
| |||||
698572 Return | Logic Analyzer graph only shows 10 lines on macOS. This is currently a limitation of LabVIEW in macOS. Workaround: N/A.
| |||||
698535 Return | Logic Analyzer TDMS file export fails. The Logic Analyzer allows you to export TDMS files, but currently only CSV files are supported.
| |||||
698001 Return | Screen capture does not capture data when using the Bode Analyzer or Current-Voltage Analyzer in Safari. The first time the screen capture button (camera icon) is pressed in the Bode Analyzer or Current-Voltage Analyzer SFP (Soft Front Panel) in Safari, no data is collected.
| |||||
698303 Return | Oscilloscope analog edge trigger switches between rising and falling edge for noisy input signals. The analog trigger may activate on a rising edge when set to trigger on a falling edge and vice versa in the Oscilloscope SFP when measuring a noisy signal.
| |||||
691820 Return | Currently Unicode characters are not supported in custom waveform filenames. When attempting to load a custom waveform file in an SFP, the file will fail to load silently. Workaround: Remove Unicode characters from the filename.
| |||||
698274 Return | Failed to connect to an NI ELVIS III in Safari 11.0. Measurements Live is only supported in Safari 11.1 and later. Workaround: Update Safari to 11.1 or later.
|