Tip Refer to the getting started guide on ni.com/manuals for basic configuration
instructions and information about connecting to a host computer using the USB
device port. NI recommends using the USB device port for configuration, debug,
This guide is intended to cover mounting, connectors, power supply and cables for use with your CompactRIO Controller and CompactRIO Chassis. It does not explicitly cover other NI product families such as DAQ Multifunction I/O, Digital Waveform Instruments (formerly HSDIO), or R Series. It also does not cover legacy or End of Life (EOL) parts or products.
Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.
Note: N/A = Not Applicable
Note: P/N = Part Number
|Controller||USB Configuration Cable|
*Bundled with CompactRIO Controller. A workaround is using P/N: 787057-01.
|Chassis||USB Configuration Cable|
For more information on any of the listed NI orderable parts, please contact an NI representative. Most NI orderable parts listed in this guide without a product page can still be purchased by contacting NI.