Filtered Results

These specifications apply to MON-10467 (AC), MON-10467 (DC), and MON-10467 (BATTERY). In this document, the MON-10467 (AC), MON-10467 (DC), and MON-10467 (BATTERY) are referred to inclusively as the MON-10467. ...

Figure 6. Analog Input Circuitry (One of Four) A I 0 ± A I4± A I 8 ± A D C M u l t i p l e x e r C h a nn el s 0, 4,

AI0+ AI0– AI4+ AI4– AI8+ AI8– AI1+ AI1– AI5+ AI5– AI9+ AI9– AI2+ AI2– AI6+ AI6– AI10+ AI10– AI3+ AI3– AI7+ AI7– AI11+ AI11– Table 1. Signal Descriptions Terminal Signal Description 0...11 AI+ Positive ...

Hardware needed: M16 gland (supplied by NI) Tools needed: 19 mm deep socket or wrench 22 mm socket or wrench #2 Phillips screwdriver (Optional) 19 mm gland dome nut tightening tool (SEALCON part number ...

AI0, AI1, AI2, AI3 sampled simultaneously AI4, AI5, AI6, AI7 sampled simultaneously AI8, A9, AI10, AI11 sampled simultaneously AI4+ AI4– AI0+ AI0– AI8+ AI8– AI1+ AI1– AI5+ AI5– AI9+ AI9– AI2+ AI2– AI6+ ...

The MON-10467 must be mounted upright to a rigid surface such as a wall, panel, strut channel, or metal post. For installations that may experience vibration, NI recommends using a thread locking compound ...

Caution Disconnect external power to the MON-10467 (AC) and use the external circuit breaker box to completely remove mains power before opening the device for service. Attention Débranchez l'alimentation ...

Note MON-10467 (AC) and MON-10467 (DC) only. V C Table 2. Terminal Descriptions Terminal Description V 24 V DC supply input C 0 V supply return Use only one V and C terminal to power the device. You can ...

Refer to the following notices for cables, accessories, and prevention measures necessary to ensure the specified EMC performance. Notice For EMC declarations and certifications, and additional information, ...

MON-10467 1 2 3 3 3 3 2 4 5 Antenna Mounting flanges Captive screws Glands Door Parent topic: Overview

Showing 1-10 of 36 results
1 of 4 pages