Archived: LabVIEW 2012 FPGA Module f1 Patch Details

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

The LabVIEW 2012 FPGA Module f1 Patch is available as a patch for the LabVIEW 2012 Development environment. The patch fixes the issue below. It is strongly recommended for all LabVIEW 2012 FPGA Module installations. It is also highly recommended that LabVIEW 2012 FPGA Module customers install the LabVIEW 2012 f3 Patch. Both are available via Update Service, or through Drivers and Updates.

IDDescription
366114DMA FIFO replaces data with zeros in certain configurations.


When a DMA FIFO is configured to one of the configurations shown below, the stream will yield bursts of good data interleaved with bursts of zeros. The user has no way of knowing they are receiving bad data. The issue only affects the LabVIEW 2012 FPGA Module.

Only FIFOs with the following configurations are affected:

FIFO TypeElement Size (Bits)Number of Elements Per WriteFIFO Depth (Elements)
Target-to-Host / Peer-to-Peer Writer82128 K
Target-to-Host / Peer-to-Peer Writer82256 K
Target-to-Host / Peer-to-Peer Writer84256 K
Target-to-Host / Peer-to-Peer Writer162128 K
Target-to-Host / Peer-to-Peer Writer162256 K
Target-to-Host / Peer-to-Peer Writer164256 K
Target-to-Host / Peer-to-Peer Writer322128 K



Related Links: 
LabVIEW 2012 f3 Patch Details