CompactRIO Device Drivers October 2019 (19.5) Bug Fixes

Overview

The following items are a subset of issues fixed in NI CompactRIO Device Drivers October 2019 (19.5). These items have been resolved since CompactRIO Device Drivers June 2019 (19.1) was released. If you have an issue ID, you can search this list to validate that the issue has been fixed in NI CompactRIO Device Drivers October 2019 (19.5).
IDFixed Issue

196653

When attempting to export a module using the MDK Utility, the export fails with error code 8 (file permission error). This occurs because the files produced by the previous export in the same version of LabVIEW are set to read-only permission.

738160

When adding a RIO Mezzanine Card (RMC) to an sbRIO in the LabVIEW project, it is given the name "RMC" without any information on the specific RMC number.

739019

When programming the NI 9262 in Calibrated mode using an FPGA I/O Node to set channel output values, any channels that are not included in the node are overwritten and set to output zero volts. This issue manifests itself when multiple FPGA I/O Nodes are used in a LabVIEW FPGA program, and will cause channels that were previously outputting non-zero values to be reset to zero. The issue does not affect users that are programming the module in Raw mode or with User-Controlled I/O Sampling.

740746

The NI 9212 Getting Started example returns incorrect temperatures when using the NI 9212 in Raw mode. This does not occur if the NI 9212 is in Calibrated mode. 

741152

When using multiple, parallel FPGA I/O Nodes with the NI 9262, the output values do not get updated from the first written output value. If the first written value is non-zero, this can cause the module to be unable to return to zero volt output.

2126839

When utilizing the NI-9208 module in DAQmx programming mode in a cRIO-9047, the shared variables that are used to capture and display the acquired data from this module do not work properly when a Real-Time executable is built, deployed, and set to run as startup on the cRIO. When trying to achieve this task, the deployment completes with no issues but the shared variables do not update their values accordingly. However, if the application is executed directly from LabVIEW the shared variables work as expected. 

 

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).