Filtered Results

Create a project file (.digiproj) to organize and access digital configuration and pattern files, which you can double-click to open in the corresponding document window. Use the Project Explorer window ...

Use the capture waveform configuration document to view, modify, save, and load capture waveform files (.digicapture). Use the capture functionality when the data you need to acquire is site-specific or ...

Jump Jump opcodes are analogous to if/else operations. Syntax Parameters Descriptions jump( label ) label is any local label within the pattern file or any label exported from another pattern file. Executes ...

Syntax Parameters Description set_seqflag( seqflag_list ) seqflag_list is a comma-separated list of sequencer flags. You cannot repeat flags. Valid values include seqflag0 , seqflag1 , seqflag2 , and seqflag3 ...

To interactively debug patterns on digital pattern instruments, you typically pause the execution of the test program and open a project in the Digital Pattern Editor that has the same active pin and channel ...

Syntax Parameters Description capture_start( waveformName ) waveformName is the name of the capture waveform. The name can begin with a letter or underscore ( _ ) and is limited to A-Z , a-z , 0-9 , or ...

Use the digital scope to view a graph of the expected waveform underneath the actual waveform using the pattern, timing set, and levels, including compare strobe locations, VOH and VOL levels, and expected ...

Table 1. Keyboard Shortcuts Within the Digital Pattern Editor Action Shortcut Throughout the Digital Pattern Editor Launch search dialog box Zoom in and out Launch a specific topic ...

The NI text pattern file ( .digipatsrc ) uses the following syntax. Refer to the Related reference section at the end of this topic for a link to more information about each of these components. Header ...

Click the Grid tab on the pattern document toolbar to launch the pattern grid view. Use this view to see components of the binary pattern file, including time sets, labels, opcodes, vector numbers, pin ...

Use the timing document to view, create, modify, save, and apply timing files (.digitiming). Timing files include period, edge multiplier (edge x), drive format, and edge information for pattern execution. ...

Select File > Export Pattern to save the binary version of the pattern file ( .digipat ) as a text pattern file ( .digipatsrc ) or as a compressed text pattern file ( .digipatsrc.gz ) that you can store ...

The required file format version declaration specifies the unique version of the NI text pattern file format to which the pattern complies using the following syntax:

A digital pattern file can contain only one pattern. You typically use one of the following methods to generate pattern files: Create a simple pattern in the Digital Pattern Editor. Write custom scripts ...

The text version of the pattern file can include an arbitrary number of comments before the file format version declaration. Each line of a header comment uses double forward slashes ( '//' ) followed ...

Use the Relay Configurations section on the Pin Map tab to specify a set of relays and their relay position states. You can right-click any item in the section you want to edit and use the context menu ...

Use the Relay Groups section on the Pin Map tab to specify a grouping of relays that you can reference with a single name. You can right-click any item in the section you want to edit and use the context ...

Select File > Import Pattern to import text pattern files ( .digipatsrc or .digipat.gz ) into the Digital Pattern Editor. You must include an active pin and channel map file in the project before you can ...

Use this view to see capture waveform data per site in columns for the last pattern burst. The capture waveform data updates with each burst. Use the capture_start, capture, and capture_stop opcodes to ...

When you import a pattern file into the Digital Pattern Editor, the editor automatically compiles the file. You can also use the Digital Pattern Compiler command-line tool ( DigitalPatternCompiler.exe ...

Use this section of the Pin View pane to specify pin driver options. A green icon Green Icon next to the Drive section indicates that the digital pattern instrument is in digital mode for the current pin ...

You must configure a register map externally and then add it to your Digital Pattern Editor project. Digital Pattern Editor does not support the creation of register map documents.

Use the levels document to view, create, modify, save, and apply levels files (.digilevels). The levels document displays voltage and current levels to drive and compare for digital pins and pin groups ...

To interactively debug patterns on digital pattern instruments, you typically pause the execution of the test program and open a project in the Digital Pattern Editor that has the same active pin and channel ...

Typically, the Digital Pattern Editor prompts you to load a pattern on the digital pattern instrument before bursting. The editor also prompts you to load all referenced waveforms and patterns that the ...

The required pattern declaration defines the sequence of pattern vectors and defines the pins and pin groups to which the pattern applies using the following syntax:

Showing 1-30 of 3478 results
1 of 116 pages