Archived: NI System Driver Set August 2013

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Contents

The NI System Driver Set August 2013 provides the latest version of NI drivers as of the release on August XX, 2013. NI LabVIEW 2013 is the latest version of the graphical development software supported by this driver set. This driver set adds support for the following hardware:

  • PXIe-4610
  • PXIe-5160 (2CH)
  • PXIe-5160 (4CH)
  • PXI(e)-2542/44
  • PXIe-6348/49
  • PXI-2865
  • cDAQ-9188XT (chassis)
  • PXIe-6612/14
  • NI 5792
  • NI 5793
  • NI 5762-03/-05
  • NI 6588
  • PXIe-8383 modules
  • cRIO-9068 (Linux RT / Zynq integrated chassis)

For LabVIEW version compatibility please see the system driver set main page.

 

Contents

The following drivers are included in the July 2013 System Driver Set:

  • Data Acquisition
    • NI DAQmx 9.7.0*
    • Traditional NI-DAQ 7.4.4
  • Instrument Control
    • NI-488.2 3.1.1
    • NI-VISA 5.3
    • NI-Serial 3.9.1
    • IVI Compliance Package 4.5
    • PXI Platform Services 3.2.2*
    • NI System Monitor 1.2
    • NI-VXI 3.8.1
  • Modular Instruments
    • NI-Switch 4.6.1
    • NI-DMM 3.0.6
    • NI-Scope 4.0
    • NI-RFSA 2.7*
    • NI-FGEN 2.9.1
    • NI-DCPower 1.8.0*
    • NI-RFSG 1.9.0*
    • NI-HSDIO 1.9
    • NI-5690 1.1
    • NI-5640R 1.6
    • NI-OSI 2.0
    • NI-VNA 2.0.1
    • NI-HWS 1.5
  • Timing and Synchronization
    • NI-Sync 3.3.5
    • NI-TimeSync 1.1.5
    • NI-1588 Configuration 1.1.5
  • Reconfigurable IO
    • NI-RIO 12.1
    • CompactRIO 12.1
    • R Series 12.1
    • NI-FlexRIO 12.1
      • FlexRIO Adapter Module Support 3.3*
  • Motion
    • NI-Motion 8.4
  • Vision
    • NI-IMAQ 4.7
    • NI-IMAQdx 4.0
    • NI-IMAQ I/O 2.6
  • Distributed I/O
    • NI-FieldPoint 6.0.12
    • NI-WSN 1.4.0
  • Real-Time and Embedded
    • NI-488.2 3.1.1
    • NI-Serial 3.9.1
    • NI-Watchdog 5.2
  • Communication Buses and Protocols
    • NI-XNET 1.7
    • NI-CAN 2.7.4
    • NI-DNET 1.6.7
    • NI-IndCom for CANopen 1.0.2
    • NI-IndCom for DeviceNet 2.2
  • Configuration and Utilities
    • NI LabVIEW SignalExpress 2012
    • NI I/O Trace 3.0.2
    • NI Measurement and Automation Explorer 5.4
    • NI System Configuration 5.4
    • NI Network Browser 5.4

 

*Update from NI System Driver Set July 2013.

 

 

Download

To download the August 2013 driver set run the downloader attached to this document. Note that this download is larger than 4 GB. Please follow the instructions in KnowledgeBase 5JHC2SDX for downloading this file.