NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
This page shows supported versions of FieldPoint Controllers with LabVIEW Real-Time development systems. Reference this information to ensure you install the correct toolkit version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing LabVIEW palettes or functions.
| Driver | LabVIEW RT | |||||||
|---|---|---|---|---|---|---|---|---|
| 2010 | 2011 | 2012 | 2013 | 2013 SP1 | 2014 SP1 | 2015 | 2015 SP1 | |
| FieldPoint | 6.0.7 | 6.0.9 | 6.0.11 | 6.1.0 | 13.1+ | 14.5+ | 15.0+ | 15.5 |
| FP VI Manager | 6.0.7 | 6.0.9 | 6.0.11 | 6.1.0 | ||||
| NI-VISA | 5.0.0 | 5.1.0 | 5.2.0 | 5.4.0 | 5.4.1 | 14.0 | 15.0 | 15.5 |
| NI-Serial | 3.6.0 | 3.8.0 | 3.8.1 | 4.0.0 | 4.1 | 15.0 | 15.0 | 15.0 |
| NI-Watchdog | 4.1.0 | 5.1.0 | 5.2.0 | 5.3.0 | ||||
| NI-IRDA | ||||||||
| Data Socket | 4.7.0 | 4.9.0 | 5.0.0 | 5.1.0 | ||||
| PID Toolkit | 10.0.0 | 11.0.0 | 12.0.0 | 13.0.0 | ||||
| Modbus I/O Server | 1.7.0 | 1.8.0 | 12.0.0 | 13.0.0 | ||||
| Variable Client Support | 1.7.0 | 1.8.0 | 12.0.0 | |||||
| Compatible Version |
| Driver | Legacy LabVIEW RT | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.1.1 | 6.1.3 | 7.0 | 7.1 | 8.0 | 8.2 | 8.5 | 8.5.1 | 8.6 | 8.6.1 | 2009 | |
| FieldPoint | 4.1.6 | 4.1.6 | 4.1.7 | 5.0.2-6.0.4 | 5.1.1-6.0.1 | 5.0.1-6.0.6 | 6.0.0-6.0.8 | 6.0.1-6.0.8 | 6.0.3-6.0.10 | 6.0.4-6.0.10 | 6.0.5-6.0.12 |
| FP VI Manager | 1.0.28 | 1.0.28 | 2.0.1 | 3.0.0 | 4.0.0 | 4.1.0 | 6.0.0 | 6.0.0 | 6.0.3 | 6.0.4 | 6.0.5 |
| NI-VISA | 3.0.1 | 3.1 | 3.4.1 | 4.0 | 4.2 | 4.3 | 4.4 | 4.4 | 4.5.1 | ||
| NI-Serial | 2.0.2 | 2.0.2 | 2.5.2 | 2.5.3 | 2.5.6 | 3.1 | 3.3.0 | 3.3.1 | 3.3.2 | 3.3.3 | 3.3.4 |
| NI-Watchdog | 1.0.28 | 1.0.28 | 2.0 | 2.1.0 | 2.1.4 | 2.1.5 | 2.1.5 | 2.1.5 | 3.0 | 3.0.1 | 4.0.0 |
| NI-IRDA | 1.0.1 | 1.0.1 | 1.0.1 | 1.0.1 | 1.0.1 | 1.0.1 | |||||
| Data Socket | 4.2 | 4.3 | 4.4 | 4.5 | 4.5.4 | 4.5.5 | 4.5.5 | 4.7.0 | |||
| PID Toolkit | 8.2 | 8.5 | 8.5.1 | 8.6 | 8.6.1 | 9.0.0 | |||||
| Modbus I/O Server | 1.2.2 | 1.4.0 | 1.4.1 | 1.5 | 1.5.1 | 1.6.0 | |||||
| Variable Client Support | 1.0.0 | 1.2.2 | 1.4.0 | 1.4.1 | 1.5 | 1.5.1 | 1.6.0 | ||||
| Compatible Version |
If you have LabVIEW Real-Time 6.0 or 6.1 installed on the controller, NI recommends that you upgrade to version 6.1.3 or later. Versions 6.1.3 and later are available on the FieldPoint 4.1 CD. For version 6.1.1 and earlier, contact NI.
LabVIEW Real-Time 7.1 or later requires MAX 3.1or later and must be installed using MAX. Refer to the Using the LabVIEW Real-Time Software Wizard topic in the Remote Systems help. To begin this Wizard, click the + next to the controller you wish to use under Remote Systems. Then right-click Software and select Add/Remove Software. This will initialize the LabVIEW Real-Time Software Wizard.