cRIO-904x BIOS 1.2.1f0 for Bootable USB Drive 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: CompactRIO

Version: 1.2.1f0

Release date: 03-07-2019

Software type: Firmware

Operating system: Linux RT

Description

This BIOS update is compatible with all cRIO-904x controllers except TPM-enabled models. See the following download page for the equivalent TPM-enabled cRIO-904x BIOS update.

cRIO-904x BIOS 1.2.1f0 for Bootable USB Drive

This BIOS version addresses the Spectre Variant 2, Variant 3a, Variant 4, and Foreshadow vulnerabilities.

Important! Flashing this BIOS will reset your CMOS default settings. Please record changes you have made to them prior to flashing this BIOS!

Installation Instructions

BIOS UPDATE INSTRUCTIONS

STEP 1: Create Bootable USB Key
--------------------------------------------------------
To use this application, you must have a USB flash disk. This USB flash disk will be formatted so that, when booted, it prepares the system for a BIOS update. This application runs on Microsoft Windows operating systems.

NOTE: Flashing this BIOS will reset your CMOS default settings. Please record changes you have made to them prior to flashing this BIOS!

To use the application, follow these steps:

  1. Insert a USB flash disk into one of your computer's USB slots.
  2. After the OS has finished identifying the USB drive, run the CreateUSBUtilityDisk.exe application. The application will detect all USB flash disks in the system and display them in a drop-down list.
  3. Select the USB flash disk you would like to make bootable using the drop-down list.
  4. After selecting the appropriate disk, click the "Make Bootable" button. The application will format the USB flash disk with a bootable DOS image and HDD diagnostic application. A progress bar will indicate when the application is finished formatting the disk.
  5. Close the application by clicking "Close".
  6. The USB flash disk should now be bootable.


STEP 2: Update BIOS in EFI Shell
---------------------------------------------

  1. Insert the USB flash drive into your controller. Set up your controller to boot first from this USB flash drive using the following procedure:
    - While the controller boots, press DEL to enter the BIOS Setup Utility
    - Navigate to the Boot menu. Follow the on screen help to change the boot ordering so that your USB flash drive is the first boot device.
    - Press F10 to save and reboot
  2. Once the controller boots into EFI Shell, wait for 5 seconds to let startup.nsh runs.
  3. Follow the onscreen instructions in order to flash your BIOS.
  4. Once the system starts the BIOS update process, be sure to let the program complete or the system will become corrupted and unbootable.
  5. Once the program finishes, system will reboot automatically into EFI shell again.
  6. Remove the USB flash drive and type "reset" follow by pressing "Enter" key to reboot the system again.
  7. If a problem occurs during the flash, contact National Instruments technical support for assistance.

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit