Table Of Contents


    Last Modified: October 14, 2020

    8-Channel, ±10 V Powered-Sensor Voltage Input Device for FieldDAQ

    • Connect directly to amplified sensors with built-in, configurable sensor power
    • Built-in signal conditioning and filtering for accurate voltage measurements
    • Rugged, water-resistant, and dust-proof design with shock and vibration resistance over 100 g/10 g RMS conditions
    • Thermally stable design allows for minimal accuracy drift over -40 °C to 85 °C range
    • Distributed Time Sensitive Networking (TSN) architecture reduces cabling cost, installation time, and enclosure requirements
    • 24-bit resolution and sample rates up to 100 kSample/s for fast, accurate measurements
    • Easier software development with the NI-DAQmx driver, featuring hundreds of libraries for timing, triggering, and more

    Kit Contents

    Items in your FieldDAQ kit:

    • FD-11601
    • FD-11601 Quick Start
    • FD-11601 Safety, Environmental, and Regulatory Information
    • 1 M12 female cap for power IN connector (connected to device)
    • 11 M12 male caps for power OUT, Ethernet, and input connectors (connected to device)

    Cables and Accessories

    The following table lists some cables and accessories available for your FieldDAQ device. For a complete list of FieldDAQ accessories and ordering information, refer to the pricing section of the FD-11601 product page at

    Table 1. FD-11601 Cables and Accessories
    Cable/Accessory Part Number
    IP67 Power Supply 147464-01
    PS-16 Power Supply 781094-01
    M125F-Pigtail Power Cable (1 m, 2 m, 3 m lengths) 786172-01/02/03
    M125F-M125M Power Cable (0.3 m, 1 m, 2 m lengths) 786173-0R3/01/02
    SHM128M-RJ45 Ethernet Cable (1 m, 2 m, 3 m, 10 m lengths) 785944-01/02/03/10
    SHM128M-SH128M Ethernet Cable (0.3 m, 1 m, 3 m lengths) 785946-0R3/01/03
    SHM125M-Pigtail I/O Cable (0.3 m, 1 m, 3 m lengths) 785950-0R3/01/03
    SHM125M-Pigtail-RA I/O Cable (1 m, 3 m lengths) 785949-01/03
    FD-11950, M125F Field-serviceable I/O Connector 785941-01
    FD-11951, M125F-RA Field-serviceable I/O Connector 785942-01
    M12 Torque Wrench, Ethernet and I/O 786181-01
    M12 Torque Wrench, Power 786182-01
    Universal M12 Male Cap, Plastic 786177-01
    Universal M12 Male Cap, Metal 786178-01
    Universal M12 Female Cap, Plastic 786180-01
    Universal M12 Female Cap, Metal 786179-01
    FD-11960, DIN Rail Mounting Kit 786443-01

    Driver Support

    Earliest driver support version for your FieldDAQ device:

    Table 2. FD-11601 Driver Support
    Driver Earliest Version Support
    NI-DAQmx 18.5

    PDF Documentation

    Documents that contain information about your FieldDAQ device:

    • FD-11601 Quick Start
    • FD-11601 User Guide
    • FD-11601 Specifications
    • FD-11601 Safety, Environmental, and Regulatory Information
    • FD-11601 Calibration Procedure

    Recently Viewed Topics