Table Of Contents

Setup Match Contour Pattern (G Dataflow)

Last Modified: June 25, 2019

Sets parameters that are used during the matching process.

connector_pane_image
datatype_icon

curve extraction options

Cluster containing information about how curves are extracted from the image.

datatype_icon

Extraction Mode

Input that specifies how the node identifies curves in the image.

Name Value Description
Normal 0

(Default) Select if you want the node to make no assumptions about the uniformity of objects in the image or the image background.

Uniform Regions 1

Select if you want the node to assume that either the objects in the image or the image background consist of uniform pixel values. This allows the node to more accurately calculate the external curves of the objects.

datatype_icon

Edge Threshold

Minimum contrast a seed point must have for it to begin a curve.

Valid values range from 1 to 255.

Default: 75

datatype_icon

Edge Filter Size

Width of the edge filter that the node uses to identify curves in the image.

Name Value Description
Fine 0

Sets to fine edge filter size.

Normal 1

(Default) Sets to normal edge filter size.

Contour Tracing 2

Sets to contour tracing edge filter size, which provides the best results for contour extraction but increases the time required to process the image.

datatype_icon

Min Length

Length, in pixels, of the smallest curve that you want the node to identify.

The node ignores any curves that have a length less than this value.

Default: 25

datatype_icon

search step size

Distance, in the y direction, between the image rows that the algorithm inspects for curve seed points.

Valid values range from 1 to 255.

Default: 15

datatype_icon

Max Endpoint Gap

Maximum gap, in pixels, between the endpoints of a curve that the node identifies as a closed curve.

If the gap is larger than this value, the node identifies the curve as an open curve.

Default: 10

datatype_icon

Subpixel

Boolean value that specifies if curve points are detected with subpixel accuracy.

TRUE Curve points are detected with subpixel accuracy.
FALSE Curve points are not detected with subpixel accuracy.

Default: FALSE

datatype_icon

match options

Cluster identifying the conditions under which the node finds template matches.

datatype_icon

Rotation

Boolean that specifies when the node searches for occurrences of the template in the inspection image, allowing for template matches to be rotated.

TRUE Searches for occurrences of the template in the inspection image, allowing for template matches to be rotated.
FALSE Does not search for occurrences of the template in the inspection image.
datatype_icon

Scale

Boolean that specifies when the node searches for occurrences of the template in the inspection image, regardless of if possible matches are of a different size in the inspection image.

TRUE Searches for occurrences of the template in the inspection image, regardless of if possible matches are of a different size in the inspection image.
FALSE Does not search for occurrences of the template in the inspection image.

The default scale range is 75% to 125%.

datatype_icon

occlusion

Boolean that specifies whether or not to search for occluded versions of the shape.

datatype_icon

subpixel accuracy?

Boolean value that specifies whether to return the match results with subpixel accuracy.

TRUE Returns match results with subpixel accuracy.
FALSE Does not return match results with subpixel accuracy.

If match feature mode is set to Color, the node ignores this setting.

Default: FALSE

datatype_icon

range settings

Array of the acceptable ranges for each match constraints option.

To decrease the search time, limit the range of these constraints as much as possible.

datatype_icon

Match Constraints

Match option whose values you want to constrain by the given range.

Name Value Description
Rotation Angle (degrees) 0

Set a range for this option to specify the angles at which you expect the node to find template matches in the inspection image. The node ignores this range if the Rotation is not enabled.

Scale Factor (%) 1

Set a range for this option to specify the sizes at which you expect the node to find template matches in the inspection image. The size is expressed as the following percentage: the size of the match divided by size of the template image, multiplied by 100. The node ignores this range if the Scale is not enabled.

Occlusion (%) 2

Set a range for this option to specify the amount of occlusion you expect for a match in the inspection image. Matches that have up to 50% occlusion are accurately detected. The node ignores this range if the Occlusion is not enabled.

datatype_icon

Min

Minimum value of the range for a given match constraint.

datatype_icon

Max

Maximum value of the range for a given match constraint.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

use learn curve extraction

Boolean that specifies whether to use contour learn options from the Setup Learn Contour Pattern node to extract the target contours during the match phase.

datatype_icon

match setup data

String that contains information about the setup parameters for the matching phase.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics