Table Of Contents

Build CoordSys (Points) (G Dataflow)

Last Modified: June 25, 2019

Builds a reference for any arbitrary coordinate system with respect to the image plane.

The reference of the coordinate system is specified as the position of the origin of the coordinate system, the orientation of its x-axis with respect to that of the image plane, and the direction of the axis.

connector_pane_image
datatype_icon

reference points

Array of point clusters that define the coordinate system.

If two points are specified, these points are assumed to lie along the x-axis of the coordinate system and the first point is used as the origin of the coordinate axis, as shown in the following figure.

If three points are specified, the first two points are assumed to be along the x-axis, and the third point is assumed to be on the y-axis of the coordinate system, as shown in the following figure.

datatype_icon

axis reference

Direction of the coordinate system.

The axis reference can be direct or indirect.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

coordinate system

Coordinate system defined by reference points and the axis reference.

datatype_icon

origin

Point cluster that specifies the origin of the base reference coordinate system.

datatype_icon

angle (deg)

Angle the base reference coordinate system makes with the image coordinate system.

datatype_icon

axis reference

Orientation of the axis.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics