Table Of Contents

Connecting Multiple Hosts to the Same Target

Last Modified: June 10, 2021

Configure one or more host computers to communicate with the same target using the VeriStand Gateway.

Before you begin, you will need the IP address of the host that you want to run the VeriStand Gateway.
  1. On the host that you want to connect, open the VeriStand Editor.
  2. In the Navigation pane, click Project Files.
  3. Double-click your project file (.nivsprj) to open it as a new tab.
  4. In the Configuration pane, click the Document tab.
  5. In Gateway address, enter the IP address of the host running the VeriStand Gateway.
    spd-note-note
    Note  

    The default is localhost, which specifies that the VeriStand Gateway is running on the local machine.

  6. Click File»Save all.
The host you configured now connects to the instance of the VeriStand Gateway that runs on the host whose IP address you entered.

Recently Viewed Topics