Configure analog input (AI) channel properties to measure temperature using a thermocouple.
|Minimum Value||The minimum value you expect to measure before VeriStand performs any scaling or calibration.|
|Maximum Value||The maximum value you expect to measure before VeriStand performs any scaling or calibration.|
|Thermocouple Type||Specifies the type of thermocouples connected to the
channel. Thermocouple types differ in composition and measurement
|CJC Value||Specifies the temperature of the cold-junction if you set the CJC Source property to Constant Value.|
|CJC Source||Specifies the source of cold-junction compensation: