Table Of Contents

Monitoring Incoming NI-XNET Frame Logging

Last Modified: June 10, 2021

Check the status of your logging of incoming NI-XNET frames by using the Error, Finished Files, and Status channels.

Before you begin, you must add a raw frame data logging file.
  1. Launch the VeriStand Editor.
  2. In the Project Files pane, double-click a system definition file (.nivssdf). System Explorer opens.
  3. Click Targets»Controller»Hardware»Chassis»NI-XNET in the configuration tree.
  4. Select an NI-XNET LIN, FlexRay, or CAN port.
  5. Click Incoming»Raw Frame Data Logging and select a log file.
  6. Depending on your goal, click a channel.
    Goal Channel
    Review the most recent logging error. Error
    Determine what files are ready for use by other processes. Finished Files
    Find the current status of the data logging process. Status
    You can monitor these channels from the VeriStand Editor and Workspace, or map them to other channels within the project.

Recently Viewed Topics