The VCSEL I-V Test Software provides LabVIEW VIs and examples for you to create and deploy applications to perform high-speed pulse testing on the VCSEL I-V Test Subsystem.
You can use the VCSEL I-V Test Software to perform the following tasks:
Refer to the VCSEL I-V Test Subsystem User Manual for concepts and step-by-step instructions about using the VCSEL I-V Test Software to perform I-V measurements on the VCSEL I-V Test Subsystem.
To access the VCSEL I-V Test VIs, select and navigate to from the block diagram in LabVIEW.
The VCSEL I-V Test VIs can return general LabVIEW error codes.
|VCSEL Calculate I-V Point VI||Calculates the current-voltage relationship based on raw data acquired from DUTs.|
|VCSEL Close VI||Closes a VCSEL session and deallocates reserved resources.|
|VCSEL Configure Sweep Setting VI||Configures a pulse during a sweep for I-V measurements.|
|VCSEL Draw I-V Curve VI||Plots the I-V curve based on the current-voltage relationship that the VCSEL Calculate I-V Point VI generates.|
|VCSEL Generate Pulse and Read Measurement VI||Generates pulses and acquires raw measurement data from DUTs in serial or parallel mode.|
|VCSEL Initialize VI||Initializes the VCSEL I-V Test Subsystem. This VI loads system and pulse compensation data and returns a VCSEL session.|
Refer to the following examples in the labview\examples\VCSEL I-V Test directory to learn how to create VCSEL I-V test applications: