Create test steps to record your tests and measurement data.
On the client, create the following code in a VI to create test results and steps, run a test sequence, structure your data to render it correctly in the Test Monitor UI, and acquire results. The code is split into three images to highlight specific functions throughout the VI. Therefore, you must add all the code captured in this topic to a single diagram in a VI.
Customize the gray sections for your unique programming goals.
|Open Configuration initiates a connection to the server.|
|Initialize Test Result configures a local reference of the new test result on the client test system.|
|The Property Node sets properties to the test result. You can see these properties in the Test Monitor UI.|
|Create Test Result adds the local test result reference to the server with the properties you set.|
|Initialize Test Step From Result configures and associates a local reference of a test step to the test result you created.
You must add the test result to the server before you can associate any test step(s) with it. Therefore, call this VI after you call Create Test Result. Furthermore, since this VI creates only a local reference to the test step, you must call Create Test Step after this VI to add it to the server.
|Generate Named Value converts the data you want to add to the test step as a named value object. Wire Build Array to the named value this VI generates to format the test data.|
|The Property Node sets the inputs for the test step using the named values the Build Array returns.|
|Create Test Step adds the local test step reference to the server with the properties you set. You can run a test VI after Create Test Step.|
|Build a cluster structure for the TestStand data model so data displays correctly in the Test Monitor UI. Refer to Structuring Your Test Data to create the subVI you need to display your data correctly in Test Monitor.|
|Generate Named Value converts the test data into outputs. Wire Build Array to the named value this VI generates to format the test data.|
|The Property Node reads the outputs and data for the test step.|
|Update Test Step modifies the test step with the properties and data set by the Property Node.|
|Update Test Result sets the result status based on the result of the test step. You can see the results in the Test Monitor UI.|