Adds an IVI device with a specific driver and topology to a virtual device configuration.
Name of the driver of the IVI device. Valid values are NI-DAQmx or IVI.
Handle that identifies the virtual device previously allocated by niseCfg Get Virtual Device.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
IVI logical name (case sensitive) of the switch to configure.
Information to document about the IVI device setup for reference or grouping and filtering.
Name of the topology for the IVI device.
Reference to the virtual device from the configuration previously allocated by niseCfg Get Virtual Device.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Reference to the IVI device on the virtual device to configure.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application