Table Of Contents

What You Need to Get Started

    Last Modified: May 20, 2019

    You will need the following items to set up your FieldDAQ device.

    Figure 1. FieldDAQ Installation Supply List
    1. Host Computer running Windows or NI Linux RT
    2. Application Software
    3. NI-DAQmx Driver
    4. FieldDAQ Device
    5. 5-pin L-coded M12 Power Input Cable
    6. 8-pin X-coded M12 Ethernet Cable
    7. External Power Supply
    8. 8-pin A-coded M12 I/O Cables and Accessories

    You can either use a shielded straight-through Ethernet cable or an Ethernet crossover cable to connect the FieldDAQ device directly to your computer.

    Recently Viewed Topics