Table Of Contents

Creating a Small Panel

Last Modified: March 25, 2021

You must open a large panel and configure a device control setup for your Semiconductor Device Control Add-On project before you can create a small panel.

Complete the following steps to create a small panel for a Semiconductor Device Control Add-On project.

  1. Click Edit Layout to add a small panel to the current large panel layout, or click Home»Manual Layout to add the small panel to a new large panel layout.
  2. Select Create small panel from the drop-down menu for the Semiconductor Device Control Add-On within the Edit Layout window.
    spd-note-note
    Note  

    You can only add a Semiconductor Device Control Add-On small panel to an instrument layout with a large panel.

  3. Click OK.
  4. Verify that the small panel is linked to the correct register map file, and click OK.

Recently Viewed Topics