Last Modified: September 18, 2017
Table 1. Signal Descriptions
Signal |
Reference |
Description |
P0.<0..7> |
D GND |
Port 0 Digital I/O Channels—MSB: P0.7, LSB: P0.0. |
AO <0..15> (V) |
AO GND <0/16..15/31> |
Analog Output Channels—These terminals supply voltage output. |
AO <16..31> (I) |
AO GND <0/16..15/31> |
Analog Output Channels—These terminals supply current output. |
AO GND <0/16…15/31> |
— |
Analog Output Ground—Each ground terminal is shared between one voltage and one current channel. These pins are connected to the device analog ground plane. All device ground planes connect to the computer system's ground signal. |
AO GND |
— |
Analog Output Ground—Additional pins connected to analog output ground. If you are using a SH68-68-D1 cable, these signals are not connected. |
D GND |
— |
Digital Ground—These terminals are connected to the device digital ground plane. All device ground planes connect to the computer system’s ground signal. |
+5 V |
D GND |
+5 V Power Source—This terminal is connected to the computer system's +5 VDC supply through a self-resetting circuit breaker. |
RESERVED |
— |
Reserved for future use. |
Recently Viewed Topics