Table Of Contents

ConfigStatus

Last Modified: February 7, 2020

Configuration status of the PDU.

This property is used only if you change the Database property Show Invalid From Open? from False (default) to True.

Data type: datatype_icon

Long Name: Configuration Status

Class: XNET PDU

Permissions: Read

Configuration Status returns an NI-XNET error code. You can pass the value to the Simple Error Handler error code input to convert the value to a text description (on message output) of the configuration problem.

By default, incorrectly configured PDUs in the database are not returned from the XNET Cluster PDUs property because they cannot be used in the bus communication. You can change this behavior by setting the XNET Database ShowInvalidFromOpen? property to True. When the configuration status of a PDU became invalid after the database is opened, the PDU still is returned from the Cluster PDUs property even ifShowInvalidFromOpen? is False.

The following are examples of invalid PDU configuration:

  • You have not defined a required property of the PDU (for example, PDU Payload Length).
  • The number of bytes specified for this PDU is incorrect. CAN PDUs must use 0 to 8 bytes. FlexRay PDUs must use 0 to 254 bytes (PDUs payload must fit into a frame).

Where This Property Is Available:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics