Table Of Contents
Type
Last Modified: December 6, 2019
Determines the mechanism used to transfer frames in this schedule entry (slot).
The default value is Unconditional (0).
Data type: 
The values (enumeration) for this property are:
| Enumeration | Value | Description |
|---|---|---|
| Unconditional | 0 | A single frame transfers in this entry (slot). |
| Sporadic | 1 | The master transmits in this slot. The master selects among multiple frames to transmit. Only updated frames are transmitted. When multiple frames have been updated, the master decides by priority; the other updated frames remain pending and can be sent when this schedule entry executes again. Order of frames in the Frames property determines frame priority. |
| Event-triggered | 2 | Multiple slaves can transmit a frame in this slot. When a collision occurs, this is detected and resolved using a schedule specified in the Collision Resolving Schedule property. |
| Node configuration | 3 | Schedule entry contains a node configuration service. The node configuration service is defined as raw data bytes in the Node Configuration:Free Format:Data Bytes property. |
A LIN frame can exist in multiple schedules and multiple schedule entries. For example, if a frame exists in an Event-triggered entry in schedule A, it also exists in an Unconditional entry of a different schedule B, so that Event-triggered collisions in schedule A can be resolved by switching to schedule B.
Where This Property Is Available:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application