Reads and writes properties for an XNET ECU I/O name.
Use the XNET ECU property node to change the configuration of an electronic control unit (ECU).
| Name | Description |
|---|---|
| Cluster | Provides the I/O name of the parent cluster to which the ECU is connected. |
| Comment | Comment describing the ECU object. A comment is a string containing up to 65535 characters. |
| ConfigStatus | Provides the configuration status of the ECU object. |
| FrmsRx | Returns an array of I/O names of frames the ECU receives. |
| FrmsTx | Returns an array of I/O names of frames the ECU transmits. |
| NameShort | Short name (string) identifying the ECU object. |
| FlexRay.Coldstart? | Indicates that the ECU transmits a startup frame. |
| FlexRay.ConnectedChs | Specifies the channel(s) that the FlexRay ECU (node) is physically connected to. |
| FlexRay.StartupFrm | Returns the I/O name of the startup frame the ECU sends. |
| FlexRay.WakeupChs | Specifies the channel(s) on which the FlexRay ECU (node) is allowed to generate the wake-up pattern. |
| FlexRay.WakeupPtrn | Specifies the number of repetitions of the wakeup symbol that are combined to form a wakeup pattern when the FlexRay ECU (node) enters the POC:WAKEUP_SEND state. |
| LIN.ConfigNAD | Configured node address (NAD) of a LIN slave node. |
| LIN.FunctionID | A 16-bit value identifying the function of the LIN node (ECU). |
| LIN.InitialNAD | Initial node address (NAD) of a LIN slave node. |
| LIN.Master? | Determines whether the ECU is a LIN master (True) or slave (False). |
| LIN.P2min | Minimum time in seconds between reception of the last frame of the diagnostic request and the response sent by the node. |
| LIN.ProtclVer | Version of the LIN standard used by this ECU. |
| LIN.STmin | Minimum time in seconds the node requires to prepare for the next frame of the diagnostic service. |
| LIN.SupplierID | A 16-bit value identifying the supplier of the LIN node (ECU). |
| J1939.PreferredAddress | Specifies the preferred SAE J1939 node address to be used when simulating this ECU. |
| J1939.NodeName | Specifies the SAE J1939 node name to be used when simulating this ECU. |