Table Of Contents
XNET Create Session (G Dataflow)
Version:
Last Modified: September 16, 2019
Creates an XNET session to read/write data on the network.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Conversion Mode.
.gvi.png){kind=icon}
Creates an XNET session at run time using strings instead of XNET I/O names. This node is for advanced applications, when
you need to store the configuration as strings (such as within a text file).
Frame Input
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Input Queued mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Input Single-Point mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Input Stream mode.
PDU
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Input Queued mode. This selection uses a PDU to specify the raw data, not
a frame. Use the frame selections of XNET Read for the session, and access the payload array only.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Input Single-Point mode. This selection uses a PDU to specify the raw data,
not a frame. Use the frame selections of XNET Read for the session, and access the payload array only.
Frame Output
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Output Queued mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Output Single-Point mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Output Stream mode. This instance is supported for CAN and LIN only (not
FlexRay).
PDU
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Output Queued mode. This selection uses a PDU to specify the raw data, not
a frame. Use the frame selections of XNET Write for the session, and access the payload array only.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Frame Output Single-Point mode. This selection uses a PDU to specify the raw data,
not a frame. Use the frame selections of XNET Write for the session, and access the payload array only.
Signal Input
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Input Single-Point mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Input Waveform mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Input XY mode.
Signal Output
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Output Single-Point mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Output Waveform mode.
.gvi.png){kind=icon}
Creates an XNET session at run time for the Signal Output XY mode.