Table Of Contents

XNET ECU Class

Last Modified: September 16, 2019

Reads and writes properties for an XNET ECU I/O name.

Use the XNET ECU property node to change the configuration of an electronic control unit (ECU).

Name Description
Cluster Provides the I/O name of the parent cluster to which the ECU is connected.
Comment Comment describing the ECU object. A comment is a string containing up to 65535 characters.
Configuration Status Provides the configuration status of the ECU object.
Frames Received Returns an array of I/O names of frames the ECU receives.
Frames Transmitted Returns an array of I/O names of frames the ECU transmits.
Name (Short) Short name (string) identifying the ECU object.
FlexRay:Coldstart? Indicates that the ECU transmits a startup frame.
FlexRay:Connected Channels Specifies the channel(s) that the FlexRay ECU (node) is physically connected to.
FlexRay:Startup Frame Returns the I/O name of the startup frame the ECU sends.
FlexRay:Wakeup Channels Specifies the channel(s) on which the FlexRay ECU (node) is allowed to generate the wake-up pattern.
FlexRay:Wakeup Pattern Specifies the number of repetitions of the wakeup symbol that are combined to form a wakeup pattern when the FlexRay ECU (node) enters the POC:WAKEUP_SEND state.
LIN:Configured NAD Configured node address (NAD) of a LIN slave node.
LIN:Function ID A 16-bit value identifying the function of the LIN node (ECU).
LIN:Initial NAD Initial node address (NAD) of a LIN slave node.
LIN:Master? Determines whether the ECU is a LIN master (True) or slave (False).
LIN:P2min Minimum time in seconds between reception of the last frame of the diagnostic request and the response sent by the node.
LIN:Protocol Version Version of the LIN standard used by this ECU.
LIN:STmin Minimum time in seconds the node requires to prepare for the next frame of the diagnostic service.
A 16-bit value identifying the supplier of the LIN node (ECU).
SAE J1939:Preferred Address Specifies the preferred SAE J1939 node address to be used when simulating this ECU.
SAE J1939:Node Name Specifies the SAE J1939 node name to be used when simulating this ECU.

Recently Viewed Topics