Table Of Contents

LO IF2 Frequency

Last Modified: May 22, 2018

Specifies the frequency, in Hz, of the IF2 LO.

Data type: datatype_icon

Long Name: Clocking and Synchronization:Local Oscillator:LO IF2 Frequency

Class: NI-USRP

Permissions: Read/Write

Channel-based No
Resettable Yes

Obtaining Carrier Frequency in Hardware

The overall carrier frequency is realized in hardware as a combination of frequency translation in the local oscillator (LO) and an additional frequency translation implemented in the digital signal processing on the FPGA. You can allow NI-USRP to automatically calculate the value for the LO frequency, or you can specify it with the LO Frequency property.

For the USRP-2945/2955, you can manually configure the separate LO stage frequencies by specifying both LO IF1 Frequency and LO IF2 Frequency to avoid the automatic tuning used in either Carrier Frequency or LO Frequency properties. When LO IF1 Frequency is configured, NI-USRP adjusts the DSP frequency translation to maintain the same overall carrier frequency if possible.

Where This Property Is Available:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application

Hardware Support:

This property supports the following hardware:

  • USRP-2945
  • USRP-2955


Recently Viewed Topics