Configures properties of the transmit (Tx) or receive (Rx) signal.
Instrument session.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Rate of the baseband I/Q data in samples per second (S/s).
Carrier frequency, in Hz, of the RF signal.
Aggregate gain, in dB, applied to the RF signal.
Channels to configure.
Antenna port to use for this channel.
Reference to your instrument session to be passed to the next node.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Actual I/Q rate, in samples per second (S/s), for this session, coerced to a value supported by the device.
Actual carrier frequency, in Hz, for this session, coerced to a value supported by the device.
Actual gain, in dB, for this session, coerced to a value supported by the device.
USRP Device | Connector Name | PCB (Internal) Name |
---|---|---|
USRP-2900/2901/2920/2922/2930/2932 | TX1, RX1 | TX/RX |
RX2 | RX2 | |
USRP-2921 | RX1, TX1 | J1 |
RX2, TX2 | J2 | |
USRP-2940/2942/2943/2944/2950/2952/2953/2954/2974 | TX1, RX1 | TX/RX |
RX2 | RX2 | |
USRP-2945/2955 | RX1 | RX |
RX2 | RX2 |