Home Support NI Product Manuals NI-TClk 17.0 to 20.0 Manual

Table Of Contents

Setup for Sync Pulse Sender Synchronize (G Dataflow)

Download Manual | Offline Viewer Required
Version:
    Last Modified: September 16, 2017

    Configures the TClks on all devices and prepares the Sync Pulse Sender for synchronization.

    connector_pane_image
    datatype_icon

    sessions in

    Array of session references that are being synchronized.

    Obtain session references from an instrument driver by using the Get Session Reference node for that driver.

    datatype_icon

    minimum T clock period

    Minimum TClk period, in seconds. The minimum period for a single chassis or PC is 200 ns. If the specified value is less than 200 ns, NI-TClk automatically coerces the minimum TClk period to 200 ns. Valid values are 0.0 s to 0.050 s (50 ms), inclusive.

    Multichassis Synchronization

    For multichassis synchronization, adjust this value to account for the propagation delays through the various devices and cables.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    		If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    sessions out

    Array of session references passed to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    		If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application

    Recently Viewed Topics