The following techniques can be used to troubleshoot errors you might encounter while routing clock signals and connecting clock terminals.
Ensure that the source and/or destination terminals you selected are compatible with one another. Refer to
Clock Terminal Connections
for a list of compatible clock routes.
Ensure that the source and/or destination terminals you selected physically exist on your hardware. Refer to your hardware documentation for specific information on its terminals and connections.
Ensure that the source and/or destination terminals you selected are not already in use by another application. Whenever you use
Connect Clock Terminals, you must disconnect the terminal route using
Disconnect Clock Terminals
before you can use the terminals for another clock route.
If you receive an error code, connect
to return a readable explanation of the error code.
Ensure that the clock terminal you are connecting is valid for the module you are using. For example, only time-based timing and synchronization devices can use the BoardClk terminal.