Table Of Contents

Configure PXI Chassis Clk10 (G Dataflow)

Version:
    Last Modified: December 19, 2018

    Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in the Star Trigger Controller Slot, also known as the System Timing Slot, of the PXI chassis.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from Initialize With Options .

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    PXI Clk10 source

    Source of the Reference Clock signal.

    This option can only be configured when the PXI-5600 is in Slot 2 of the PXI chassis.

    Name Description
    None The device does not drive the PXI 10 MHz backplane Reference clock.
    OnboardClock The device drives the PXI 10 MHz backplane Reference Clock with the PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option.
    RefIn The device drives the PXI 10 MHz backplane Reference Clock with the reference source attached to the PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option.
    datatype_icon

    session out

    Reference to your instrument session passed to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application

    Hardware Support:

    This node supports the following hardware:

    • PXI-5600 (external digitizer mode)
    • PXI-5661


    Recently Viewed Topics