Sets the state of the channels when the dynamic generation operation is idle using a binary format
The operation may be idle when the generation operation completes normally, when the generation operation pauses from an active Pause trigger, or when the generation operation terminates because of an underflow error.
The idle state across all channels configured for dynamic generation.
idle state defines the bit mask representing the idle state. High is specified with a 1, and low is specified with a 0. If you need to specify values other than high or low, use the niHSDIO Configure Idle State (String) instance of this node.
Each binary digit of this value is applied to the corresponding channel if it is configured for dynamic generation.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application