Closes an NI-HSDIO external calibration session and, if specified, stores the new calibration constants and calibration data in the onboard EEPROM.
Instrument handle that identifies your calibration session.
This parameter is obtained from the niHSDIO Initialize External Calibration node
The action to perform at closing.
Name | Value | Description |
---|---|---|
Commit | 62 | The new calibration constants and data determined during the external calibration session are stored in the onboard EEPROM, given that the calibration was complete and passed successfully. |
Cancel | 63 | No changes are made to the calibration constants and data in the EEPROM. |
Default: Commit
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application