Configures the internal routing of the channel so that you can perform specific calibration steps.
The specified channels on which to modify the internal routing.
Parameter that specifies which internal routing path to configure based on the calibration type.
Refer to the calibration procedure document for your device for the correct value to use.
The section of the external calibration procedure you are trying to execute.
Refer to the calibration procedure document for your device for the correct value to use.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Session handle that passes a reference to your calibration session to the next node.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application