Table Of Contents
Arbitrary Waveform Nodes
Last Modified: July 24, 2019
Use the NI-FGEN arbitrary waveform nodes to configure, define, and clear an arbitrary waveform.
Specifies the size of a waveform so that it can be allocated in onboard memory before loading the associated data.
Removes all previously created arbitrary waveforms, sequences, and scripts from the
waveform generator
memory and invalidates all waveform references, sequence references, and waveform names.
Removes a previously created arbitrary waveform from the
waveform generator
memory and invalidates the reference of the specified arbitrary waveform.
Configures the properties of the
waveform generator
that affect arbitrary waveform generation, selecting the arbitrary waveform to produce and setting the gain and offset.
Takes the data provided and creates an onboard waveform of the same size for use in arbitrary waveform or arbitrary sequence output modes.
Returns the properties of the
waveform generator
that are related to creating arbitrary waveforms.
Sets the position in the waveform at which data is written during the next write. Allows you to write to arbitrary locations within the waveform.
Writes data to the waveform in onboard memory.