Table Of Contents

Base Current Sweep Settings (IV Analyzer)

Last Modified: November 26, 2019

To better display measured signals on the graph, adjust the base current sweep settings according to the parameters of the transistor under test.

The following Base current sweep settings are available.
Setting Description Operational Limits
Ib start Initial base current.

Range: 0 µA to 300 µA

Resolution: 1 µA

Ib step Current interval during a base current sweep.

Range: 1 µA to 200 µA

Resolution: 1 µA

Curve count Number of curves in the sweep.

Range: 1 to 16

Resolution: 1

spd-note-note
Note  

The settings appear for the Transistor Analyzer mode only.


Recently Viewed Topics