Table Of Contents

Connecting Signals to Analog Output

Last Modified: August 8, 2019

There are no configuration settings for the analog output channels. All of the analog output channels are single-ended. Each analog output is always referenced to the analog ground (AGND). The following table shows the channel mapping.

Table 1. Analog Output Signal Mapping
Application Board Terminals Signal
Bank A A/AO0 AO 0
A/AO1 AO 1
Bank B B/AO0 AO 0
B/AO1 AO 1
AGND Analog Ground
spd-note-notice
Notice  

Use AGND for analog signals only.

You can use the NI ELVIS III Prototyping Board to access these signals. The following diagram shows the NI ELVIS III with the analog output terminals highlighted.


Recently Viewed Topics